CompTIA Practice Exam – 15 True/False practice questions
After you study your textbooks, it is important to test your newly acquired knowledge and see just how well you have absorbed the material. Practice exams….
* Reinforces what you have learned – fill in the gaps of what you missed * Gets you used to answering questions to build confidence and familiarity
Here are 15 True/False CompTIA Practice Exam Questions:
Q.1 – In order to print multipart forms, you will need to use a laser printer. True / False
Q.2 – An Antistatic wrist strap should be connected to the square hole in an outlet. True/False
Q.3 – 15 pins are on a typical VGA cable connector. True/False
Q.4 – In order to insert a USB device onto your computer, you first need to power down the computer, else the device will not be recognized. True/False
Q.5 – In a laptop, the BIOS-ACPI is a Power Management Specification. True/False
Q.6 – Event Viewer contains Errors, Warnings and Information. True/False
Q.7 – You are working on a machine and notice the fan is not running. The most likely cause is that the power supply is defective.
Q.8 – PCI has a bus width of 16, 32 and 64 bits. Tue/False
Q.9 – 850 MHz bus speed is associated with PCR3200 RAM. True/False
Q.10 – The wireless specification 802.11 provides the fastest file transfer rate. True / False
Q.11 – To start a computer in safe mode, the combination of Ctr-Shift-Esc is used. True/False.
Q.12 – The motherboard type NLX can use a riser card. True/False
Q.13 – WUXGA provide the highest resolution. True/False.
Q.14 – BTFS is the organization responsible for regulating wireless radio frequencies. True / False
Q.15 – Regedit is the most appropriate utility to disable startup files when troubleshooting startup problems. True/False
——————————————————————————–
CompTIA Practice Exam Questions A plus Essentials Answers The questions along with the answers are included in this CompTIA practice exam questions prep for your better convenience.
Q.1 – In order to print multi-part forms, you will need to use a laser printer. True/False
False. You will need to use a Dot-matrix printer.
Q.2 – An Antistatic wrist strap should be connected to the square hole in an outlet. True/False
False. It should be connected to the round hole.
Q.3 – 15 pins are on a typical VGA cable connector. True/False
True
Q.4 – In order to insert a USB device onto your computer, you first need to power down the computer, else the device will not be recognized. True/False
False. USB devices are capable of being hot swapped. There is no need to power down the computer first.
Q.5 – In a laptop, the BIOS-ACPI is a Power Management Specification. True/False
True
Q.6 – Event Viewer contains Errors, Warnings and Information. True/False
True
Q.7 – You are working on a machine and notice the fan is not running. The most likely cause is that the power supply is defective.
True
Q.8 – PCI has a bus width of 16, 32 and 64 bits. True/False
False. It has a bus width of 32 and 64 bits.
Q.9 – 850 MHz bus speed is associated with PCR3200 RAM. True/False
False. 800 MHz is associated.
Q.10 – The wireless specification 802.11n provides the fastest file transfer rate. True/False
True
Q.11 – To start a computer in safe mode, the combination of Ctr-Shift-Esc is used. True/False.
False. You start a computer in safe mode by pressing the F8 key.
Q.12 – The motherboard type NLX can use a riser card. True/False
True
Q.13 – WUXGA provide the highest resolution. True/False.
True
Q.14 – BTFS is the organization responsible for regulating wireless radio frequencies. True/False
False. It’s FCC
Q.15 – Regedit is the most appropriate utility to disable startup files when troubleshooting startup problems. True/False
False. The utility is msconfig
__________________
Now, are you ready for your CompTIA Practice Exam?
Tags: 